Data center track
Data Center Manufacturing · Electrical Enclosure
High power AI rack build taught from IPC/WHMA-A-620. Electrical enclosure build and inspection taught from IPC-A-630A. Classes can be delivered on site at your facility.
Courses
Hands on courses that build industry level workmanship.
Data Center Manufacturing · Electrical Enclosure · J-STD-001 with Space Addendum · NASA-STD-8739.4 · NASA-STD-8739.5. Each class states who attends, what they build or inspect, and the standard. Request a seat.
Space and satellite harness track
J-STD-001 · NASA-STD-8739.4 · NASA-STD-8739.5
Soldering per J-STD-001 with Space Addendum. Crimp, cable, and harness work per NASA-STD-8739.4. Fiber terminations per NASA-STD-8739.5. Recertification is listed with the courses.
Data center track
Data Center Manufacturing · Electrical Enclosure
High power AI rack build
Data Center Manufacturing / high power AI rack build taught from IPC/WHMA-A-620
This course provides instruction to those who are responsible for building or inspecting high power AI racks taught from IPC/WHMA-A-620.
Who attends. Specialists who read work instructions, rack elevations, and Eplan documentation, then build and inspect data center test racks.
What students do. Read the build package. Assemble the rack. Route, dress, and label copper, fiber, and power. Torque. Run a commercial fiber test. Inspect in process. Label and close.
Workmanship. Accept or reject the rack against the operations taught from IPC/WHMA-A-620. Hardware that meets the standard ships. Hardware that does not is reworked in class.
Certificate. TelemView certificate of completion for the class as offered.
Enclosure
Electrical Enclosure taught from IPC-A-630A
This course provides instruction to those who are responsible for building or inspecting electrical enclosures taught from IPC-A-630A.
Who attends. Specialists who read Eplan documentation and build or inspect the enclosure from it.
What students do. Hardware and ground. Board and harness into the housing. Glands, strain relief, mark, label, and final inspection.
Workmanship. Accept or reject the enclosure against IPC-A-630A. The finished hardware must meet the standard.
Certificate. TelemView certificate of completion for the class as offered.
Space and satellite harness track
J-STD-001 · NASA-STD-8739.4 · NASA-STD-8739.5
Soldering
J-STD-001 with Space Addendum
This course provides instruction to those who are responsible for soldering or inspecting high reliability assemblies per J-STD-001. The Space Addendum adds the criteria used on space flight hardware.
Who attends. Electronics specialists, inspectors, and manufacturing personnel who solder or inspect assemblies that will be judged to J-STD-001.
What students do. Practice soldering and inspection against J-STD-001 criteria, including Space Addendum requirements covered in class. Materials, heat, cleanliness, and documentation.
Workmanship. Accept or reject solder joints against the standard. Recognize common defects. The finished assembly must meet the criteria taught in class.
Certificate. TelemView certificate of completion for the class as offered.
Crimp and harness
NASA-STD-8739.4 crimp, cables, harnesses and wiring
This course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4. Students train in the methods required for reliable solderless connections on space flight hardware.
Who attends. Cable and harness specialists, avionics electrical specialists, and manufacturing personnel whose interconnects will be inspected to NASA-STD-8739.4.
What students do. Crimp, assemble, tie, strain relieve, and inspect cables and harnesses. Read a formboard.
Workmanship. Accept or reject a crimp and a harness against NASA-STD-8739.4. A bad crimp is rejected before it ships.
Certificate. TelemView certificate of completion for the class as offered.
Fiber
NASA-STD-8739.5 fiber optic terminations, cable assemblies and installation
This course provides instruction to those who are responsible for terminating, inspecting, or installing fiber optic assemblies per NASA-STD-8739.5.
Who attends. Specialists who terminate and install fiber for aerospace, satellite, ground systems, and high availability infrastructure.
What students do. Terminate, polish, inspect end faces, and install fiber assemblies using the operations taught from NASA-STD-8739.5.
Workmanship. Accept or reject a terminus by inspection, not guesswork. The finished assembly must meet the standard.
Certificate. TelemView certificate of completion for the class as offered.
Recertification
One standard
Recertification
Recertification, any single standard
This retraining course provides instruction to those whose prior training on one standard is coming due. Retraining in this field is commonly required on a 24 month cycle.
Who attends. Specialists who already hold training on the standard and need the shorter recert lab and evaluation.
Workmanship. Refresh the operations, complete the evaluation, and document current training. If prior training has lapsed, the full initial course may be required. Tell us the standard and last training date.
Certificate. TelemView certificate of completion for the class as offered.
What a class includes
- Instructor led classroom and lab time
- Materials for in class exercises
- Written and/or practical evaluation as applicable
- Completion documentation for the course attended
- TelemView certificate of completion for the class as offered
Data Center Manufacturing taught from IPC/WHMA-A-620. Electrical Enclosure taught from IPC-A-630A. J-STD-001 with Space Addendum. NASA-STD-8739.4. NASA-STD-8739.5.
Community
Apex Nevada Fund
What. A private fund that sponsors exceptional Nevada students. One sponsored seat per public class. Full or half tuition. The founder decides.
Who. Nevada resident. Tell us the class and why you should be in the room. Not a coupon. Not a state program.
How. Use the contact form and choose Apex Nevada Fund.
Bundles
Combine courses. Pay less than à la carte.
Bundles from $5,495. Full package $8,495. Request a seat.
| Package | Includes | À la carte | Bundle | You save |
|---|---|---|---|---|
| Data Center Production | Data Center Manufacturing + 8739.5 Fiber | $6,090 | $5,495 | $595 |
| Core Aerospace Specialist | J-STD-001 Space + 8739.4 Harness | $6,445 | $5,795 | $650 |
| High Reliability Fiber Track | J-STD-001 Space + 8739.5 Fiber | $6,445 | $5,795 | $650 |
| Dual NASA Standards | 8739.4 Harness + 8739.5 Fiber | $6,590 | $5,995 | $595 |
| Full Specialist Package | All three initial courses | $9,740 | $8,495 | $1,245 |
À la carte
Single courses
- Data Center Manufacturing, 5 days, $2,795
- Electrical Enclosure, 5 days, $2,795
- J-STD-001 Space, 5 days, $3,150
- NASA-STD-8739.4, 5 days, $3,295
- NASA-STD-8739.5, 5 days, $3,295
- Recertification (one standard), 3 days, $1,595
How to choose
Match the hardware, not a ranking
- Data center, rack build plus fiber when the work is Nevada manufacturing.
- Core, soldering plus harness when the work is aerospace interconnect.
- Fiber, soldering plus fiber when the work is optics heavy.
- Dual NASA, 8739.4 plus 8739.5 when soldering is already current.
- Full package, J-STD-001 plus both NASA-STD-8739 classes.
Recertification is priced per standard and is not included in bundles. Employer classes and on site training are quoted separately.
Request a bundle or a single course.
Tell us which track. We will follow up with dates, location, and what you will receive on completion.